An Overview of North American Agri-Industry
Gregory D. Williams, Ph.D., P.E., S.E., and David R. Bohnhoff, Ph.D., P.E.
Post Frame
Locating Butt-Joints in Four-Layernail-Laminated Assemblies
G. D. Williams, D. R. Bohnhoff, R. C. Moody
Tensile Strength and Stiffness of Spliced Mechanically Laminated Posts
D. R. Bohnhoff, R.C.Moody, G.D.Williams
Load-Displacement Charateristics of Metal-Clad Wood-Framed Diaphragm Joints
Gregory D. Williams Structural Engineer and David R. Bohnhoff Professor Biological Systems Engineering
Bending Properties of Four-Layer Diaphram Joints
G.D. Williams, D.R. Bohnhoff University of Wisconsin, and R.C Moody USDA Forest Service
A Proposed Engineering Practice for Mechanically-Laminated Posts
David R. Bohnhoff Agricultural Engineering Department University of Wisconsin
Modeling Metal-Clad Wood-Framed Diaphragm Bera Vior
G. D. Williams, Structural Engineer and D. R. Bohnhoff Biological Systems Engineering Dept. University of Wisconsin
Bending Properties of STP-Laminated Wood Girders
G. D. Williams, Structural Engineer, D. R. Bohnhoff Biological Systems Engineering Dept University of Wisconsin, and R. C. Moody USDA Forest Service
Evaluation of Metal-Clad Wood-Frame Diaphragm Assembly Tests
D. R. Bohnhoff, University of Wisconsin and G. D. Williams, Structural Engineer
Tensile Strength and Stiffness of Spliced Mechanically Laminated Posts
D. R. Bohnhoff, R. C. Moody and G. D. Williams
Locating Butt-Joints in Four-Layer Nail-Laminated Assemblies
G. D. Williams, D. R. Bohnhoff and R. C. Moody
Bending Properties of Four-Layer Nail-Laminated Posts
G. D. Williams, D. R. Bohnhoff and R. C. Moody
Equine Center Design
Design of an Equine Center to Meet the Teaching Needs of a Technical Institute
Mike Brugger, Assistant Professor Food, Agricultural, & Biological Engineering and Karen Wimbush, Assistant Professor Agricultural Technologies both of Ohio State University
Air Quality
Variations in air quality of new Ohio dairy facility with natural ventilation systems
L. Y. Zhao, M. F. Brugger, R. B. Manuzon, G. Arnold, E. Imerman
Air quality of swine wean-finish facilities with deep-pit and pull-plug-lagoon manure storage systems
L.Y. Zhao, R. Manuzon, M. Brugger, G. Arnold, and Roger Bender
Air Quality comparison and sensitivity analysis of setback distance models
H. Chaoui, Post Doctorate Researcher, Department of Agricultural and Biological Engineering, The Pennsylvania State University and M. Brugger, Associate Professor Emeritus, Food, Agricultural and Biological
Green House Design
Design and Construction of Greenhouse for Controlled Environment Plant Production
Mike Brugger, Associate Professor, Ph. D., P. E. Department of Food, Agricultural, and Environmental Engineering and David Ferree, Professor, Ph.D. Department of Horticulture and Crop Science both of Ohio State University
Feed Mills
Design Considerations for the Construction and Operation of Feed Milling Facilities. Part I: Planning, Structural, and Life Safety Considerations
Gregory D. Williams, Ph.D., P.E., S.E., Manager of Engineering and Kurt A. Rosentrater, Ph.D., Agricultural and Bioprocess Engineer
Design Considerations for the Construction and Operation of Feed Milling Facilities. Part II: Process Engineering Considerations
Kurt A. Rosentrater, Ph.D., Agricultural and Bioprocess Engineer and Gregory D. Williams, Ph.D., P.E., S.E.
Flour Mills
Design Considerations for the Construction and Operation of Flour Milling Facilities. Part I: Planning, Structural, and Life Safety Considerations
Gregory D. Williams, Ph.D., P.E., S.E. and Kurt A. Rosentrater, Ph.D., Agricultural and Bioprocess Engineer Design
Considerations for the Construction and Operation of Grain Elevator Facilities. Part II: Process Engineering Considerations
Kurt A. Rosentrater, Ph.D., Agricultural and Bioprocess Engineer and Gregory D. Williams, Ph.D., P.E., S.E.
Malting Plants
Design Considerations for the Construction and Operation of Malting Facilities. Part I: Planning, Structural, and Life Safety Considerations
Gregory D. Williams, Ph.D., P.E., S.E. and Kurt A. Rosentrater, Ph.D., Agricultural and Bioprocess Engineer
Grain Elevators
Design Considerations for the Construction and Operation of Grain Elevator Facilities. Part I: Planning, Structural, and Life Safety Considerations
Gregory D. Williams, Ph.D., P.E., S.E. and Kurt A. Rosentrater, Ph.D., Agricultural and Bioprocess Engineer
Meat & Poultry Processing
Design Considerations for the Construction and Operation of Meat & Poultry Processing Facilities
Kevin M. Keener, PhD, PE, Food Process Engineer and Extension Specialist Purdue University and Gregory D. Williams, Ph.D., P.E., S.E., Principal TC Group
Operational Practices in Food Processing Plants
Kevin M. Keener, PhD, PE, Food Process Engineer and Extension Specialist Purdue University and Gregory D. Williams, Ph.D., P.E., S.E., Principal TC Group
Physical and Chemical Characterization of Fuel Ethanol Coproducts
R. Bhadra, K. Muthukumarappan and K. A. Rosentrate
Granular Packing Influences Bulk Density of DDGS
Christine Keierleber and Kurt A. Rosentrater
Flowability Properties of Commercial Distillers Dried Grains with Solubles (DDGS)
Rumela Bhadra, K. Muthukumarappan, and Kurt A. Rosentrater
Biomass Storage and Handling: Status and Industry Needs
Gregory D. Williams, Ph.D., P.E., S.E and President of Facility Engineering Services, Jan C. Jofriet, Ph.D, P.Eng. Professor Emeritus, School of Engineering, University of Guelph and Kurt A. Rosentrater, Ph.D., Agricultural and Bioprocess Engineer
Engineering Career Opportunities in Agri-Industry
Authors; David R. Bohnhoff, Ph.D., P.E., Gregory D. Williams, Ph.D., P.E., S.E., Douglas J. Petrick, M. Sc. C.E.
An Undergraduate Engineering Curriculum for Agri Industrial Facility Designers
Authors; David R. Bohnhoff, Ph.D., P.E., Sundaram Gunasekaran, Ph.D., Gregory D. Williams, Ph.D., P.E., S.E. - Kurt A. Rosentrater, Ph.D., Agricultural and Bioprocess Engineer